PUBLIC AUCTION
FAIRHAVEN SHIPYARD - LIVE AUCTION
Date: 9:00 AM | Tuesday - August 13
Preview: 8:00 AM to 4:00 PM | Monday, August 12
Location: 201 Harris Ave., Bellingham, WA 98225
James G. Murphy Co.
www.murphyauction.com
425.486.1246
COMPLETE SHIPYARD AUCTION
FAITHFUL SERVANT - GENERAL DESCRIPTION
426'x148' DRY DOCK
THE FAITHFUL SERVANT IS THE FORMER SEMI‐SUBMERSIBLE BARGE LUCKY ANGEL. THE DOCK WAS ORIGINALLY BUILT IN 1979 AND CLASSED BY THE CHINESE CLASSIFICATION SOCIETY (CCS). THE DOCK UNDERWENT EXTENSIVE MID-LIFE UPGRADE AND REFURBISHMENT IN 2002/2003 UNDER THE SAME CCS CLASS STANDARDS AND WAS MAINTAINED UNDER CLASS UNTIL 2007.WHILE ITS ORIGINAL NON-LIFT TRANSFER OPERATIONS ALLOWED A MAXIMUM LIFT/TRANSFER WEIGHT OF 20,000 L.TONS, DEDICATED SERVICE AS A DRYDOCK
NECESSITATES A GREATLY REDUCED LIFT CAPACITY TYPICALLY 6,500 TO 8,500 DEPENDING ON WEIGHT AND CENTER OF GRAVITY PROPERTIES OF THE VESSEL BEING DOCKED.
*TO BE SOLD SUBJECT TO LENDERS APPROVAL
PRINCIPAL DIMENSIONS
LENGTH (OVERALL): 492.0 FT LENGTH (WATERLINE): 483.5 FT BREADTH‐MAIN HUII (MOULDED, EXCLUDING AFT TOWERS): 131.2 FT BREADTH (0A INCLUDING AFT TOWER TANKS) 148.2 FT DEPTH TO PONTOON DECK
(MOULDED): 27.88 FT DEPTH OVERALL (TOTAL HULL AND SUPERSTRUCTURE): 67.26 FT DOCK FRAME
SPACING: 8.2FT KEEL BLOCK HEIGHT (STANDARD INCLUDING 4” CRUSHERS) 3.83 FT.KEEL BLOCK HEIGHT
(MAXIMUM INCLUDING 4” CRUSHERS) 6.33 FT
AFDL 45 - GENERAL DESCRIPTION
389'x84' DRY DOCK
CONCRETE FLOATING DOCK. BUILT IN 1945,3200 LT LIFT CAPACITY, 389’ LENGTH 84’ BEAM, LENGTH OVER KEEL BLOCKS 345 FT. CLEAR WIDTH 53.2 FT. MAXIMUM DRAFT OVER KEEL BLOCKS 19 FT. HAS SERVICE CONNECTIONS FOR ELECTRICITY–800 AMPS AT 480 VAC 60 HZ 3 PHASE, POTABLE WATER, SEWAGE COLLECTION RISERS, SALTWATER COOLING WATER
SYSTEM, 75 GPM AT 90 PSI *TO BE SOLD SUBJECT TO LENDERS APPROVAL
1944 WELLMAN ENGINEERING - GENERAL DESCRIPTION
26'x120' BARGE CRANE
PEDESTAL MOUNTED LATTICE BOOM BARGE CRANE, 62-TON GROSS CAPACITY, 26’X120’ BARGE, 360 DEGREE ROTATION *TO BE SOLD SUBJECT TO LENDERS APPROVAL
ADDITIONAL EQUIPMENT
• 1987 TUG “HOOK UP” 32’X12’ STEEL TUG, 13GRT, 10NRT, TONANCO DRIVE, JOHN DEERE LUGGER L6466A/KC/BT DIESEL ENGINE, RADAR, JOG STICK, TOW BIT, DECK WINCH
• 2010 GROVE RT880E 80-TON CRANE, 4-SECTION BOOM, LMI, PAT LOAD SCALE, TRIMBLE GS 320 ANAMOMETER,
• CUMMINS QSB 6.7 DIESEL, A/C CAB, JIB, 120’ OVERALL BOOM, AIR BRAKES, OUTRIGGERS, MAIN & AUX. BLOCKS, CAB TILT, HOUR METER READS: 4,589, S/N: 231408
• 1980 GROVE RT-740 40-TON CRANE, GREER TUBE LOCK, 4-SECTION BOOM, MAIN & AUX. BLOCK, OUTRIGGERS,
• CUMMINS DIESEL, S/N: 46219
• 2016 HYSTER H190FT 17,600 LB PROPANE FORKLIFT, SIDE SHIFT, POWER FORKS, 2-STAGE MAST, DUAL CUSHION TIRES, FINGERTIP CONTROLS, HOUR METER READS: 745, S/N: B299V01848P
• 1971 P&H 9125 140-TON, 4 AXLE LATTICE BOOM TRUCK CRANE
• 2016 HYSTER H155FT 13,600 LB PROPANE FORKLIFT, SIDE SHIFT, POWER FORKS, 2-STAGE MAST, DUAL CUSHION TIRES, HOUR METER READS: 956, S/N: L006V01770P
• 2000 HYSTER H155XL2 14,050 LB PROPANE FORKLIFT, SIDE SHIFT, 2-STAGE MAST, DUAL CUSHION TIRES, MONOTROL, HOUR METER READS: 8,360, S/N: F006D05952X
• 2000 DAEWOO D70S 13,500 LB DIESEL FORKLIFT, SIDE SHIFT, 2-STAGE MAST, HOUR METER READS: 13,044, S/N: 00014
• 2001 HYSTER H80XM 7,700 LB PROPANE FORKLIFT, SIDE SHIFT, 2-STAGE MAST, MONOTROL, ENCLOSED CAB, HYDRA SMOOTH, CUSHION TIRES, HOUR METER READS: 1,085, S/N: K005D05890Y
• 2016 HYSTER H80FT 7,750 LB PROPANE FORKLIFT, SIDE SHIFT, 2-STAGE MAST, POWER FORKS, MONOTROL,
• CUSHION TIRE, HOUR METER READS: 1,383, S/N: U005V03951P
• 2004 HYSTER H50XM 4,750 LB PROPANE FORKLIFT, SIDE SHIFT, 3-STAGE MAST, CUSHION TIRE,
• HOUR METER READS: 8,441, S/N: H177B48723B
• BOBCAT 453 SKIDSTEER W/SOLID RUBBER TIRES & FRONT BUCKET, HOUR METER READS: 2,050, S/N: 515011155
• 1996 E&E 60 KW S/A GENERATOR, JOHN DEERE 404STF150 DIESEL ENGINE, MECC ALTA SPA ECN 31-3L/4 1,800 RPM, HOUR METER READS: 13,991, S/N: 763122/732348
• KOHLER 400R0ZD81 SYNCHRONOUS 440 KW BACK UP GENERATOR, DETROIT DIESEL, FUEL TANK, TRANSFER SWITCH & ELECTRICS, HOUR METER READS:UNKNOWN
• 1978 KENWORTH C/O TRUCK TRACTOR
• 1989 FORD 8000 C/O 24’ FLATBED TRUCK, DIESEL, MANUAL TRANS., ODOMETER READS: 282,807
• 2006 GMC SIERRA CREW CAB 4X4 PICKUP, V8, LEATHER, P/W, SHORT BED, PIPE RACK
• 2003 FORD F250 EXTENDED CAB PICKUP, 6.0 LTR DIESEL, LIFT GATE, LONG BED, ODOMETER READS: 39,352
• 2001 TOYOTA TUNDRA EXTENDED CAB PICKUP, P/W, P/L, CRUISE, ODOMETER READS: 266,161
• 1994 CHEVROLET CHEYENNE 12’ FLATBED TRUCK, V8, GAS, 5 SPEED MANUAL TRANSMISSION, DRW,
• ODOMETER READS: 105,522
• (3) EZ-GO 2 DOOR ELECTRIC CARTS W/6’ BEDS, HOUR METERS READS: 2,124, 1,646 & 9,3232
• (3) TAYLOR-DUNN ELECTRIC CARTS W/6’ BEDS, HOUR METERS READS: 3,638, 2,063 & 1,654
• (2) LEGEND ELECTRIC CARTS W/6’ BEDS
• YOKAHAMA MOORING BOUYS
• CINCINNATI 300H 300 TON, 14’ HYDRAULIC PRESS BREAK, FOOT CONTROLS, 12” STROKE, 12’ BETWEEN CENTERS, 440V, 3-PHASE, S/N: 39442
• CINCINNATI 6S10 10’ SHEAR, 3/4” MILD STEEL CAP., FOOT CONTROL, BACK GAUGE, 460V, 3-PHASE, S/N: 42538
• UNI-HYDRO 66-24 66 TON HYDRAULIC IRON WORKER W/TOOLING, S/N:3P66482
• SCOTCHMAN 6509 65 TON IRONWORKER, 5 HP, 460V, 3-PHASE, S/N: 3275M888
• SCOTCHMAN FI85 85 TON IRONWORKER, 5 HP, 230V, 3-PHASE (NEEDS REPAIR)
• METAL MUNCHER MM-70 70 TON IRONWORKER W/FOOT CONTROLS, S/N: 03410696
• LONGEM 1550 16”X64” LATHE, 2” THRU SPINDLE, 8” 3-JAW CHUCK, TOOL POST
• DALIAN #2 26”X120” SWING LATHE, 4-JAW CHUCK, TOOL POST, STEADY REST (NEEDS REPAIR)
• BRIDGEPORT SERIES 1 2 HP VERTICAL MILLING MACHINE, 9”X48” POWER T-SLOT TABLE, VARIABLE SPINDLE SPEED, MITUTOYO DIGITAL READOUT, S/N: 226553
• BRIDGEPORT SERIES 2 2 HP VERTICAL MILLING MACHINE, 9”X42” T-SLOT TABLE, VARIABLE SPINDLE SPEED,
• MITUTOYO DIGITAL READOUT, S/N: 209610
• MARVEL HORIZONTAL METAL CUTTING BANDSAW, 18” THROAT, 30” T-SLOT TABLE W/HYDRAULIC HOLD DOWN & 20’ ROLLCASE
• 2014 ROGERS QNW-V-200-H 200 HP VSD SKID MOUNTED ROTARY SCREW AIR COMPRESSOR, ZEKS 1000HSFA400 DRYER, RECEIVER TANK, BUILDING, HOUR METER READS: 29,382, S/N: 1406519164
• 2010 ROGERS QNW-G-1523-F 350 HP SKID MOUNTED ROTARY SCREW AIR COMPRESSOR, HOUR METER READS: 3,783, S/N: 1006515892
• 2010 ROGERS QNW-G-1523-F 350 HP ROTARY SCREW AIR COMPRESSOR, 480V, 3/60 HZ,
• RUN HOUR METER READS: 3389.2, LOAD HOUR METER READS: 2658.3, S/N: 1006515893
• INGERSOLL RAND SSR-EPE200-2S 200 HP, 990 CFM SKID MOUNTED AIR COMPRESSOR W/INGERSOLL RAND TM1000 AIR DRYER, HOUR METER READS:72,382, S/N: FF1835U99307
• QUINCY 360BZ 75 HP ROTARY SCREW AIR COMPRESSOR, HOUR METER READS: 67,301, S/N: 870652
• PARKER HYDRAULIC HOSE FITTING PRESS W/DIES
• (4)LINCOLN FOUR PACK WELDING UNITS W/(4) LINCOLN FLEXTEC 450 CC/CV DC WELDERS
• MILLER TRAILBLAZER 280 NT CC/CV, AC/DC, 8,000 WATT GENERATOR WELDER
• MILLER TRAILBLAZER 302 CC/CV, AC/DC, DIESEL GENERATOR WELDER
• MILLER DIMENSION 652 CC/CV, DC WELDING POWER SOURCE
• MILLER TRAILBLAZER 280 NT CC/CV, AC/DC, 8,000 WATT GENERATOR WELDER
• (3)MILLER XMT 304 CC/CV, DC INVERTER ARC WELDER
• MILLER BIG 50 DIESEL CC, DC WELDING POWER GENERATOR
• MILLER XMT 304 DC INVERTER ARC WELDER
• MILLER XMT 456 CC/CV, DC INVERTER ARC WELDER
• (2)LINCOLN LN-25 WIRE FEEDER
• MILLER XMT 304 CC/CV, DC INVERTER ARC WELDER
• (3) MILLER DIMENSION 652 CC/CV DC WELDING POWER SOURCES
• MILLER SYNCROWAVE 300 AC/DC TUNGSTEN ARC OR SHIELDED METAL ARC POWER SOURCE W/ TWECO
• TC900 WATER COOLER
• MILLER DELTAWELD 451 CONSISTANT VOTAGE DC ARC WELDING POWER SOURCE W/ MILLER XR-W EXTENDED REACH WIRE FEEDER
• (20+) LINCOLN LN-25X SUITCASE WELDERS
• MILLER XMT 304 DC INVERTER ARC WELDER
• HYPERTHERM POWERMAX 800 PLASMA CUTTER
• THERMAL DYNAMICS PAK MASTER 150 XL PLASMA CUTTING SYSTEM
• HYPERTHERM POWERMAX 1000 PLASMA CUTTER
• RIDGID 525 PIPE MACHINE
• RIDGID 535 PIPE THREADER
• RIDGID 300 PIPE THREADER
• RIDGID PIPE STANDS
• 2010 INDUSTRIAL VACUUM 42HF33SE2 20,000 AC FM SKID MOUNTED PORTABLE DUST COLLECTOR, S/N:B0175-01
• CLEMCO BIG CLEM T/A PORTABLE BLAST POT
• 1986 SANSTORM BOWEN-BLASTER T/A PORTABLE BLAST POT, S/N:86-0017
• SANDBLAST SHOP TO INCLUDE: APPROX. 16’X30’X10’ DRIVE IN BOOTH, DUST COLLECTOR/HOPPER, CLEMCO 245 BLAST POT, CLEMCO RECLAIM SYSTEM, (2) CLEMCO SPARE POTS, CONTROLS & VERTICAL TANK
• SHOP BUILT VERTICAL BLAST POT
• CLEMCO BIG CLEM J08156 160CF T/A PORTABLE BLAST POT
• 2010 INDUSTRIAL VACUUM DC1200ES 12,000 CFM PORTABLE DUST COLLECTOR
• (2) POWER TEMP SYSTEMS 75 KVA TEMPORARY POWER CENTERS
• 2016 SCHMIDT 160CF SKID MOUNTED BLAST POT
• GROUP OF CALIBRATION WEIGHTS
• 2014 INDUSTRIAL VACUUM QC150 QUIET CUBE SKID MOUNTED VACUUM
• (2) BLAST POTS
• DRYCO DEHUMIDIFIER
• AND MUCH MORE!!!!!
James G. Murphy Co.
www.murphyauction.com
425.486.1246
unsubscribe
FAIRHAVEN SHIPYARD - LIVE AUCTION, Bellingham, WA
- The Dieselduck
- Administrator
- Posts: 4195
- Joined: Sun Jul 22, 2007 1:41 pm
- Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)
- Contact: