Hi,
What about bowl speed? Did you check the clutch? Also is to run with frequency converter? If so check that. If you figure out what’s wrong please let us know.
Search found 43 matches
- Wed May 01, 2024 4:31 pm
- Forum: The Workshop
- Topic: Alfa Laval S936 Bowl leakage
- Replies: 5
- Views: 1096
- Wed May 31, 2023 2:31 pm
- Forum: The Workshop
- Topic: Caterpillar C8.7 temperature query
- Replies: 7
- Views: 7924
Re: Caterpillar C8.7 temperature query
It seems like the load is higher on port side. It shows 100% but is that correct? How are the exhaust gas temps and turbo pressure? How are the turbo filters and air supply? Also when was temp sensor calibrated last?
- Mon Sep 19, 2022 7:42 am
- Forum: Available Positions
- Topic: TC 1st Class for O&G NFLD
- Replies: 2
- Views: 2702
Re: TC 1st Class for O&G NFLD
Yeah is the rate 660 per day for a single day ? And you get same home? Making it 1320. Or is it 1000 for a double day? I guess the recruiting firm needs a cut but 320 a day is a big cut?
- Mon Sep 19, 2022 7:37 am
- Forum: The Workshop
- Topic: Alfa Laval S846 HFO Separator problem
- Replies: 89
- Views: 120947
Re: Alfa Laval S846 HFO Separator problem
Hi,
Is the pt 4 the pressure from the feed pump? If so check your suction strainer make sure the feed/booster pump is giving the right pressure all all valves set right? Problems with the pump maybe dirty pressure regulating valve or worn pump?
Please let us know if you find the issue.
Regards
Is the pt 4 the pressure from the feed pump? If so check your suction strainer make sure the feed/booster pump is giving the right pressure all all valves set right? Problems with the pump maybe dirty pressure regulating valve or worn pump?
Please let us know if you find the issue.
Regards
- Wed May 11, 2022 10:59 am
- Forum: F.W.E
- Topic: Edwin Millar/Jolly Jack
- Replies: 4
- Views: 15322
Re: Edwin Millar/Jolly Jack
Sad to hear this I took most of my exams for him when I got my canadian ticket. I did mention his accent when I did my orals and he said he doesn’t have an accent everybody else does. A great guy that tired to help you pass not trying to fail you. RIP
- Wed Jun 16, 2021 4:47 am
- Forum: The Workshop
- Topic: Daihatsu 6DC-17 High exhaust temperature
- Replies: 4
- Views: 8251
Re: Daihatsu 6DC-17 High exhaust temperature
How is the temps recorded? Local or remote. Check that it’s showing the true temp. What fuel are you running on?
- Wed May 19, 2021 6:08 am
- Forum: The Workshop
- Topic: Atlas copco mas ga 37 compressor
- Replies: 4
- Views: 6942
Re: Atlas copco mas ga 37 compressor
Did you clean the cooler. Check the running hours too? is it constantly running or shutting down after unloading you can check the settings. What’s the ambient temperature in the space. Check the manual for fault racing? Check belts and if the fan is running ok.
- Tue Apr 20, 2021 6:57 pm
- Forum: The Workshop
- Topic: Engine Explosion
- Replies: 2
- Views: 7195
Re: Engine Explosion
Interesting article, short turnaround ? use of the cheapest contractor? no time for crew to overseeing the work? I also find that most maintenance system follows the location not the part. For example piston cylinder #1 but if you take that piston out put an overhauled piston in what’s the history o...
- Mon Sep 14, 2020 3:07 pm
- Forum: The Workshop
- Topic: Alfa Laval 615 Purifier
- Replies: 1
- Views: 5753
Re: Alfa Laval 615 Purifier
Hi,
I would start by checking the water supply, Check pressure, strainers and timing of the valves. Check the manual for fault tracing.
Atlantic
I would start by checking the water supply, Check pressure, strainers and timing of the valves. Check the manual for fault tracing.
Atlantic
- Mon May 04, 2020 6:53 am
- Forum: The Workshop
- Topic: Windlass not taking load on my ship, ideas to fix it
- Replies: 21
- Views: 24349
Re: Windlass not taking load on my ship, ideas to fix it
Is there any plugs to air it out? Check the manual for procedure to air it out. Check the relief valves on your control block if any? Is the brake releasing proper?
Good luck and regards
Good luck and regards
- Sat Jan 18, 2020 7:55 am
- Forum: The Workshop
- Topic: Alfa Laval PU150 problem
- Replies: 7
- Views: 12774
Re: Alfa Laval PU150 problem
How is the pressure sensor mounted could it be dirty or the pipes going to it? Did you check that you have the right flow rate/pressure on the water.
- Thu Jan 16, 2020 3:59 am
- Forum: The Workshop
- Topic: Alfa Laval PU150 problem
- Replies: 7
- Views: 12774
Re: Alfa Laval PU150 problem
Check the water valves and the water pressure, also air pressure for the 3 way valve. does it have nozzles in bowl? Change them out. Is the electrical motor frequency controlled? There could be issues there.
- Tue Oct 22, 2019 1:57 pm
- Forum: The Workshop
- Topic: Alfa Laval S846 HFO Separator problem
- Replies: 89
- Views: 120947
Re: Alfa Laval S846 HFO Separator problem
Hi,
Is it belt driven? Check the clutch pads and the surfaces for the pads, belt tension is also important. If it slips the bowl speed drops. Check the manual for number of pads to be used it can differ dependent of what set up you have.
Is it belt driven? Check the clutch pads and the surfaces for the pads, belt tension is also important. If it slips the bowl speed drops. Check the manual for number of pads to be used it can differ dependent of what set up you have.
- Wed Feb 06, 2019 3:25 pm
- Forum: The Workshop
- Topic: Dirty/brown/orange colour cooling water
- Replies: 28
- Views: 39125
Re: Dirty/brown/orange colour cooling water
Maybe take a sample of the water you are using and mix it with coolant and let it sit to see if it gets discoloured. Look into the chemical you are using is it the right type for the material used in the engine cooling system.
- Wed Feb 06, 2019 9:30 am
- Forum: The Workshop
- Topic: Dirty/brown/orange colour cooling water
- Replies: 28
- Views: 39125
Re: Dirty/brown/orange colour cooling water
Hi
I agree with big Pete it’s running to cold maybe a cracked liner or engine block.
I agree with big Pete it’s running to cold maybe a cracked liner or engine block.